05-23-2016 12:17 AM
I have to connect the public network with integrated lan card and share it to the other PC via USB ethernet adapter.
After installing the USB adapter, the adapter is disabled automatically and it shows error code 22 in device maanger.
Once I click enable the device, it can be enabled for less than 1 second and then goes back to disabled.
This condition happens on both of Axis chip and Realtek chip.
Is there any solutions to enable the USB adpter successfully?
Solved! Go to Solution.
05-24-2016 09:25 AM
I found the root cause that there is a application automatically disabled my NIC. After stoping the application, the NIC can be enabled correctly.