Wifi turns off when lid closed; won't reconnect

[afriendihope]

Recently, my laptop started disconnecting and turning off Wi-fi when I close the lid. Once I open it back up, it will not reconnect without a restart. 

• I had changed no settings nor recently updated.
• I made sure to go to the Realtek Wireless Network Adaptor in Device Manager and unchecked the  "Allow the computer to turn off this device to save power".
• I also went to the Power Options and set it so it does Nothing when the lid is closed.
• I have made sure all drivers/Bios is updated.
• I did a System Restore.
• I did a reset to factory settings.

I also noticed that my Wi-fi went from just "Wi-fi" to "Wi-fi 2" but I don't know if that means anything. 

Help?

[Echo_Lake]

@afriendihope
Thank you for posting on the HP Support Community.

I have a few troubleshooting steps we could try to fix the issue:  

Wireless Module test:

Use the following steps to open the Component Tests menu.

1. Hold the power button for at least five seconds to turn off the computer.
2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
3. On the main menu, click Component Tests.
4. The Component Tests menu displays.
5. Wireless Module Test - This test checks that the BIOS detects the wireless module and that it is enabled.

To run the test, click the Wireless Module, and then click Run once.

1. The Wireless Module Test takes 30 seconds to complete.

If the test passes, try these steps:

Reinstall the network adapter using HP Recovery Manager (Windows 8, 10)

Reinstall original software or drivers using the HP Recovery Manager. If your PC does not locate the Recovery Manager installed, click the ‘next step’ button below.

1. In Windows, search for and open HP Recovery Manager. If prompted for an administrator password or confirmation, type the password or provide confirmation. If prompted by User Account Control to allow the program to make changes to the computer, click Yes.
2. Under Help, click Reinstall drivers and/or applications and wait for Recovery Manager to generate a list.
3. From the combined list of applications and drivers, with the drivers listed first, select the checkbox next to the drivers you want to reinstall. NOTE: The name of the adapter varies, depending on which one is installed on your PC.
4. When the Installation is completed message displays, click OK.
5. Close all open applications, restart your computer, then try connecting to the Internet again.

Set BIOS default and restart:

1. Restart your notebook.
2. During startup, press F10 repeatedly until the BIOS menu is displayed.
3. Once the BIOS menu is displayed, press F9 to restore factory defaults.
4. Select Yes to confirm.
5. Press F10 to save changes and exit.
6. Select Yes to confirm.
7. The computer restarts using the default settings.

After your computer has restarted once in Windows test your wireless connectivity. Try connecting to the Internet again.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

[afriendihope]

I tried all suggestions and the problem persists. 

[Echo_Lake]

@afriendihope
Thank you for posting back. 

This sounds like hardware related issue with the wirless card,

I would request you to reach out to our Support and our Support Engineers should be able to sort this out. HP Support can be reached by clicking on the following link: www.hp.com/contacthp/

Please feel free to contact us here anytime you need any further assistance. Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.