Wireless Connection issue - Realtek RTL8723DE driver related

[sonerilker83]

I can connect internet with ethernet cable without any issue but when I remove the cable and try to connect wireless either the speed of connection drops drastically or there is no connection. I try to update many different drivers for Realtek RTL8723DE but none of them solved my issue. What can else can be tried?

[Echo_Lake]

@sonerilker83

Thank you for posting on HP Support Community.

Don't worry as I'll be glad to help, I have a few troubleshooting steps we could try to fix the issue:  

Use the following steps to open the Component Tests menu.

1. Hold the power button for at least five seconds to turn off the computer.
2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
3. On the main menu, click Component Tests.
4. The Component Tests menu displays.
5. Wireless Module Test - This test checks that the BIOS detects the wireless module and that it is enabled.

To run the test, click the Wireless Module, and then click Run once.

• The Wireless Module Test takes 30 seconds to complete.

If the test passes, try these steps:

Reinstall the network adapter using HP Recovery Manager (Windows 8, 10)

Reinstall original software or drivers using the HP Recovery Manager. If your PC does not locate the Recovery Manager installed, click the ‘next step’ button below.

1. In Windows, search for and open HP Recovery Manager. If prompted for an administrator password or confirmation, type the password or provide confirmation. If prompted by User Account Control to allow the program to make changes to the computer, click Yes.
2. Under Help, click Reinstall drivers and/or applications and wait for Recovery Manager to generate a list.
3. From the combined list of applications and drivers, with the drivers listed first, select the checkbox next to the drivers you want to reinstall. NOTE: The name of the adapter varies, depending on which one is installed on your PC.
4. When the Installation is completed message displays, click OK.
5. Close all open applications, restart your computer, then try connecting to the Internet again.

If the test passes, try these steps:

• From the Start screen, type device manager to open the Search charm, and then select Device Manager from the search results. Double-click Network adapters. Right-click the name of your wireless network adapter, and then select Uninstall.
• Click here: https://support.hp.com/in-en/document/c03535285 to complete the troubleshooting steps.

If the test passes, try these steps:

1. Open Start.
2. Search for Device Manager and click the top result to open the experience.
3. Expand the category with the device that you want to roll back.
4. Right-click the device, and select the Properties option.
5. Click the Driver tab.
6. Click the Roll Back Driver button.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

[sonerilker83]

[sonerilker83]

There is no component test menu, memory test and hard drive checks completed without any issue. Driver for wireless uninstalled and reinstalled (sp100552 -- name for driver). But problem still exists, I couldn't connect internet by wireless. What else I can try?

[Echo_Lake]

@sonerilker83

Thank you for posting back.

I appreciate your efforts to try and resolve the issue. I would suggest performing system factory reset will put the computer back to the original factory settings in this way all corrupted and outdated software will be removed. 

While doing the recovery there is an option to backup your personal files. If you have not previously done one now is a good time. 

Restoring Files that were Backed Up Using HP Recovery Manager (Windows )You can also contact HP support for assistance. They can remotely access your system to help alleviate difficulties: www.hp.com/contacthp/

The HP Cloud Recovery Tool allows you to download recovery software to a USB drive. You can use the downloaded recovery image file in order to install the Windows operating system. 

• Click here: https://support.hp.com/in-en/document/c04758961#AbT3to perform System Recovery (Windows 10) 
• Click here: https://support.hp.com/in-en/document/c06162205 to Use the HP Cloud Recovery Tool (Windows 10)

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

[sonerilker83]

I've tried factory reset and recovery but nothing changed. Even I format the laptop and reinstall the windows 10 however still couldn't connect with wireless.

[Echo_Lake]

@sonerilker83

Thank you for posting back.

I would request you to reach out to our Support and our Support Engineers should be able to sort this out. HP Support can be reached by clicking on the following link: www.hp.com/contacthp/

Please feel free to contact us here anytime you need any further assistance. Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.