Z2 G9 Workstation CPU I7 12 gen WIFI module AX411NGW

[P7Snake]

Looking for support help, will Wifi Module   AX411NGW   work in a Z2 G9 Workstation tower.  CPU I7 12 gen.

Seems notes on this computer indicate an AX211 module ( M.2. CNVIO2 ) is recommended. (pre-date AX411 ?)

The AX411NGW ( M.2.CNIO2 ) a little faster. The AX411 has very specific notes that the CPU must be 12/13th Gen CPU.

The connector on the Mother board appears to be for the AX211, which leads me to think the AX411NGW 

will work.

All advice appreciated. 

[Paul_Tikkanen]

Hi:

Does the PC have a Wi-Fi card installed now?

If not, there are probably no antenna wires which would be required.

If there are no antenna wires, the easiest thing to do would be to install a desktop Wi-Fi kit that includes external antennas.

You can probably install the new Intel BE200 Wi-Fi 7 card and it is not CNVi, so there shouldn't be any compatibility issues.

Wi-Fi 7 BE200 desktop wifi kit for sale | eBay

If you want to stick with a 411AX it should work since the card is also CNVio 2.

AX411 desktop wifi kit for sale | eBay

Comparison of the AX211 and AX411:

Intel® Product Specification Comparison

[Marc-z2]

HI. I have the same question as I have a Z2 G9 SFF with intel I7 13gen.Did you try what was proposed? Was it successfull?

Regards.

[Marc-z2]

Hi, I finally installed the following Intel Wifi 7 BE200NGW  kit on my Z2 G9 SFF  I7 13gen :

https://www.amazon.ca/dp/B0CQR5PFW6?psc=1&ref=ppx_yo2ov_dt_b_product_details

It was easy to install as cable connection were already made to the card and antenna connectors fitted in the holes made for external antennas.

If this can help others. 🙂

Regards,

Marc