have error code 0XB83A283A

[mlove923]

i have an errorcode 0XB83A283A pop up on my printer 

[atharva_gp]

@mlove923,

Thanks for reaching out to the HP Support community!

• What is the model of your printer?
• How is the printer connected? Is it Wired(USB/Ethernet) or Wireless?

Please provide the above information to assist you with an accurate solution.

Cheers!

[mlove923]

 h p office Jet 3830  

Wireless

[atharva_gp]

@mlove923,

Let's try performing a Power Reset.

• Make sure this printer is plugged into a direct wall, not a surge protector.
• Turn the printer on.
• Wait until the printer is idle and silent before you continue.
• Remove all of your ink cartridges from the printer and close the door.
• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the rear of the printer.
• Turn on the printer, if it does not automatically turn on. The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
• Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
• Reinsert the ink cartridges, and then close the ink cartridge access door.
• Check if the error goes off and try to make a copy.

Let me know if this helps. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping.