-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Wireless and Networking
- wireless connection drops on HP Pavillion DV6 notebook PC
Create an account on the HP Community to personalize your profile and ask a question
12-23-2016 04:06 AM
Hi Forum,
I have a Pavillion DV6 ( 2011 model).
It has an intel 1030N wireless card.
The problem is that it drops connection randomly.
and when that happens, the notebook will crash to bluescreen upon shutting down.
the bluescreen error is
Driver_power_State_Failures
STOP: 0x0000009f
I have updated to the latest bios (2013) and the latest wireless driver from intel (2012)
not much luck
Please help
Thanks
Michael
Solved! Go to Solution.
Accepted Solutions
12-24-2016 11:37 AM
Hello Michael,
The most common causes for a wireless connection drop are your wireless router and network card. I will suggest few steps that should get your wireless connection back up and running.
If you are using a router (particularly a dual band router), you’ll want to go into the wireless settings (usually under “setup”), and specify a channel. Try using a different channel than the default, and make this settings for both of your bands (2.4Ghz and 5Ghz) if you’re using a dual bound router. Definitely do not use the “auto” setting. From our troubleshooting it appears that this is the main culprit. Try setting a higher channel, and if that doesn’t work, try different channels. It’s very possible that there are enough networks in your immediate area on the same channel that they’re conflicting with each other.
If switching the router channel didn’t work, you can try these other tips to help prevent your wireless connection from dropping.
First, see if your computer is managing your wireless card’s power. It may be instructed to shut off your wireless connectivity after a certain amount of idle time goes by. If you have system specific utilities, such as Dell’s Quickset, make sure that the wireless power management isn’t set to shut off the card if your computer is idle for a certain period of time. Second you’ll want to check the settings on your wireless card via your device manager. In Windows XP:
- Right-click on “My Computer” and select “Properties”
- Select “Hardware” and click on “Device Manager”
- Find your wireless card under “Network adapters” and double-click it.
- Verify that there aren’t any auto power management settings enabled that might be shutting your card down prematurely.
Michael, let me know , if this has helped you resolve the issue.. if not , i shall let you know more steps.
Regards,
Ashok
12-24-2016 11:37 AM
Hello Michael,
The most common causes for a wireless connection drop are your wireless router and network card. I will suggest few steps that should get your wireless connection back up and running.
If you are using a router (particularly a dual band router), you’ll want to go into the wireless settings (usually under “setup”), and specify a channel. Try using a different channel than the default, and make this settings for both of your bands (2.4Ghz and 5Ghz) if you’re using a dual bound router. Definitely do not use the “auto” setting. From our troubleshooting it appears that this is the main culprit. Try setting a higher channel, and if that doesn’t work, try different channels. It’s very possible that there are enough networks in your immediate area on the same channel that they’re conflicting with each other.
If switching the router channel didn’t work, you can try these other tips to help prevent your wireless connection from dropping.
First, see if your computer is managing your wireless card’s power. It may be instructed to shut off your wireless connectivity after a certain amount of idle time goes by. If you have system specific utilities, such as Dell’s Quickset, make sure that the wireless power management isn’t set to shut off the card if your computer is idle for a certain period of time. Second you’ll want to check the settings on your wireless card via your device manager. In Windows XP:
- Right-click on “My Computer” and select “Properties”
- Select “Hardware” and click on “Device Manager”
- Find your wireless card under “Network adapters” and double-click it.
- Verify that there aren’t any auto power management settings enabled that might be shutting your card down prematurely.
Michael, let me know , if this has helped you resolve the issue.. if not , i shall let you know more steps.
Regards,
Ashok
12-28-2016 09:41 AM
Thank you too Michael for replying. Indeed happy to know , that the solution worked. I will be happy to resolve any issues that might occur with your computer, Michael. So, please be free to use this platform for any technical issues.
Regards,
Didn't find what you were looking for? Ask the community