-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Notebooks Archive
- 8530p - No 5.1 channel audio over HDMI

Create an account on the HP Community to personalize your profile and ask a question

05-07-2014 11:28 AM
Has anyone gotten anything other than 2 channel audio over HDMI on the Elitebook 8530p? I have tried different drivers directly from ATI and HP. I tested it on WinXP x86 and Win7 x64. Windows always lists the audio channel configuration as 2 channel stereo. Is this a limitation of the hardware?
Solved! Go to Solution.
Accepted Solutions
05-08-2014 05:37 PM
Hi again,
I don't have a 5.1 system to try to simulate your problem with on with my Probook 4540s.
However, I did a little more digging and found that someone had a similar problem on this forum about a year ago. They were able to find a solution that might be helpful to you:
Good luck!
05-07-2014 12:32 PM
I am not familiar with the specific 8530p audio hardware capabilities, but everything I know about HDMI in general indicates that it supports 5.1 Dolby Audio.
On my 4540s, when I run an HDMI cable directly to the TV(Stereo only) I notice that it cuts out my desktop speakers.
I don't know your exact configuration, but it seems like the HP site has at least the beginnings of a pretty good troubleshooting procedure at this link:
It might put you in the right ballpark, at least, for finding the answer to your question.
05-07-2014 07:09 PM
Audio output depends on the Hardware that you connect the HDMI cable to.
Can you tell what are you connecting the HDMI cable to?
If its a TV then you will get only 2 channels as TV don't have 6 speaker configuration.
If you connect it to a receiver that supports 5.1 or 7.1 over HDMI then you must first configure it to receive 6 or 8 channel audio.
I'm an HP Employee.The opinions expressed here are my personal opinions, not of HP.
Click on Thumbs up if my post helped you.Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
05-08-2014 06:18 AM
Its connected to a Denon AVR-890 AVR which then is connected to a TV.
The AVR is able to receive multi channel audio from my Xbox 360, blu-ray or satellite receiver.
The LED indicator on thie AVR only shows 2 channel from this laptop.
If I right-click the speaker in the Windows system tray -> Playback Devices -> select AMD HDMI -> click Configure, the only option is Stereo.
05-08-2014 05:37 PM
Hi again,
I don't have a 5.1 system to try to simulate your problem with on with my Probook 4540s.
However, I did a little more digging and found that someone had a similar problem on this forum about a year ago. They were able to find a solution that might be helpful to you:
Good luck!
05-08-2014 06:05 PM
05-12-2014 08:28 AM
@chfisa wrote:Hi again,
I don't have a 5.1 system to try to simulate your problem with on with my Probook 4540s.
However, I did a little more digging and found that someone had a similar problem on this forum about a year ago. They were able to find a solution that might be helpful to you:
Good luck!
This worked! Thank you so much!
