cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
AJC999
New member
2 1 0 0
Message 1 of 3
6,845
Flag Post

Enabling VT-X on HP Probook 4530s

HP Recommended
HP Probook 4530s
Microsoft Windows 7 (64-bit)

HELP!

 

I need to enable VT-X on my HP Probook 4530s and am having no joy!

 

I need it to develop using Android Studio effectively -  so that I can run android device emulation.

 

I cant launch Android Virtual Device (AVD) in an emulator as AVD reports an error and tells me  I Need to install Intel HAXM as emulation requires Hardware Acceleration.
To successfully install the Intel HAXM -it needs the pre-requisite that the intel vt-x be enabled in my computers  bios.

I eventually was able to turn on virtualisation in the bios (I think! -  see note lower down) but it did not help with the install of Intel HAXM.


I also,

---try turning off firewall during the HAMX install - didnt help
---turned off 'Windows Virtual PC' in ControlPanel/Programs/'Turn windows features on or off'  during the HAMX install - didnt help
---installed piriform 'speccy' to inspect the value. When I navigated to cpu/virtualistion -  it states that virtualisation is supported but disabled.

 

How do I get the HAMX install to work if RT-X is not enabled?

How do I get RT-X to be enabled?

 

I am not convinced the BIOS enablement of virtualisation worked. I have inserted a photo of the bios setup menu,  where the only reference to anything associated with RT-X is the Virtualisation reference below - which I accessed by pressing ESC on boot up, followed by F10 for the BIOS setup, logged in as the biosAdministrator, then navigating to the 'System Configuration/Device Configurations' menu option.

 

Apologies for the quality of the screen in the photo - my display has a loose connection and so is a bit blurry but you can make out that the virtualisation checkbox (4th from bottom) is ticked and there are no other references to virtualisation or RT-X anywhere else in the bios menu structure. Note that I have not seen any bios menu interfaces like mine on youtube or elsewhere and so cant follow the myriad of advice out there. What is in my photo is all you get as far as mentioning virtualisation -  there is no RT-X references in the menu structure at all. This is why I installed speccy -  to check if RT-X was enabled and it would appear it is supported but not enabled. So I am stuck

 

 As a jpeg at 25.jpg

 

My hope is that once VT-X is enabled, then the intel HAMX install will succeed and then I will be able to create some android device emulators via AVD.

 

any ideas greatly appreciated!

 

Anthony (aka AJC999)

0 Kudos
2 REPLIES 2
AJC999
Author
New member
2 1 0 0
Message 2 of 3
Flag Post
HP Recommended

Can anybody help me with this issue?

 

regards Anthony

0 Kudos
NaimDeveci
New member
1 1 0 0
Message 3 of 3
Flag Post
HP Recommended

System Config > Boot Opt > enable UEFI

 

this is worked for me

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation