HP 530 CPU upgrade

[sidz]

hi, will t7200 work with following set up? my cpu is at 100% most of the times and am fed up fiddling with processes and services. thanks in advance

CPU-Z TXT Report
-------------------------------------------------------------------------

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 1

APICs
-------------------------------------------------------------------------

Processor 0
-- Core -256
-- Thread -256 -1

Timers
-------------------------------------------------------------------------

ACPI timer 3.580 MHz
HPET timer 14.318 MHz
Perf timer 1.689 MHz
Sys timer 1.000 KHz

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = -1
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Celeron M
Codename Conroe-L
Specification Intel(R) Celeron(R) M CPU 530 @ 1.73GHz
Package (platform ID) Socket 479 mPGA (0x1)
CPUID 6.6.1
Extended CPUID 6.16
Core Stepping A1
Technology 65 nm
Core Speed 1728.7 MHz
Multiplier x Bus Speed 13.0 x 133.0 MHz
Rated Bus speed 531.9 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 1024 KBytes, 4-way set associative, 64-byte line size
FID/VID Control no

Chipset
-------------------------------------------------------------------------

Northbridge Intel i945GME rev. 03
Southbridge Intel 82801GHM (ICH7-M/U) rev. A1
Memory Type DDR2
Memory Size 2 GBytes
Channels Dual
Memory Frequency 266.0 MHz (1:2)
CAS# latency (CL) 4.0
RAS# to CAS# delay (tRCD) 4
RAS# Precharge (tRP) 4
Cycle Time (tRAS) 12
Bank Cycle Time (tRC) 16
MCHBAR I/O Base address 0x0FED94000
MCHBAR I/O Size 4096
MCHBAR registers

[Huffer]

Yeah see the post right above. With the 945 chipset you can use a T7200