• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended

Hi Chaps

 

Can someone sanity check this configuration for me? I have 3 HP Procurve 2620 POE switches though I'm focusing on the first one as the other two are fairly straightforward. 

 

I've attached an image to this post showing the layout of Switch 1. 

 

I've got the two VLANs working, and devices tagged with VLAN10 can access the VOIP server and untagged devices can access the servers. 

 

However neither VLAN can access the firewall on port 47. This might be a firewall issue, which we're looking at, but I was wondering if someone could check the procurve config for me and make sure. 

 

Thanks

 

Here's the config.

 

10.1.1.251 = Windows Server inc DHCP

10.2.1.2 = VOIP Server inc DHCP

 

*********************

; J9627A Configuration Editor; Created on release #RA.15.10.0010
; Ver #03:03.17.2f:38
hostname "Switch-POE1"
dhcp-snooping authorized-server 10.1.1.251
dhcp-snooping authorized-server 10.2.1.2
dhcp-snooping vlan 1 10
no telnet-server
no web-management
web-management ssl
ip routing
interface 1
name "To Switch1"
exit
interface 3
name "To Switch2"
exit
interface 5
name "To Switch3"
exit
interface 7
name "To Switch4"
exit
interface 9
name "To Switch5"
exit
interface 37
name "WinDHCP"
exit
interface 39
name "FileServer"
exit
interface 41
name "VirtualHost"
exit
interface 43
name "FileServer2"
exit
interface 45
name "VOIP Server"
exit
interface 47
name "Firewall"
exit
interface 50
name "POE2"
exit
snmp-server community "public" unrestricted
vlan 1
name "DEFAULT_VLAN"
no untagged 45
untagged 1-44,46-52
ip address 10.1.1.1 255.255.0.0
ip helper-address 10.1.1.251
exit
vlan 10
name "Phone_Vlan"
untagged 45
tagged 2,4,6,8,10,12-36,38,40,42,44,46
ip address 10.2.1.1 255.255.255.0

ip helper-address 10.2.1.2
qos priority 6
voice
exit
no dhcp config-file-update
password manager
password operator

 PoE Switch Layout.png

1 REPLY 1
HP Recommended

Hi:

 

You may also want to copy and paste your question in the HP Business Support Forum -- Procurve Switches section.

 

http://h30499.www3.hp.com/t5/ProCurve-ProVision-Based/bd-p/switching-e-series-forum

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.