-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Notebooks Archive
- How to program System Configuration ID to bios???

Create an account on the HP Community to personalize your profile and ask a question

02-04-2015 09:55 AM - edited 02-04-2015 10:27 AM
Good day to all.
Yes I can not figure out how to do this.
Programed the P/N, S/N and the UUID.
Need a little help with the System Configuration ID.
Regards,
REO
Solved! Go to Solution.
Accepted Solutions
02-04-2015 10:42 AM
Hi Reo,
I think you need the PCID - this will hopefully be under the battery ( sometimes it on the system board ). It should start pcid followed by a string of numbers.
Best regards,
David
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Windows Insider MVP
02-04-2015 10:42 AM
Hi Reo,
I think you need the PCID - this will hopefully be under the battery ( sometimes it on the system board ). It should start pcid followed by a string of numbers.
Best regards,
David
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Windows Insider MVP
02-04-2015 12:57 PM - edited 02-04-2015 12:57 PM
Thanks David.
On this model it must be located some where on the motherboard.
To bypass this and stop the error I just entered 25 "0" zeros.
Worked just fine.
Thanks again.
Regards,
REO
02-04-2015 01:38 PM
Hi Reo,
You're welcome and very useful to know that the field can just be filled with zeros
All the best,
David
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Windows Insider MVP
02-04-2015 04:59 PM
Definitely time for a
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Windows Insider MVP
09-03-2015 02:49 AM
sorry to bring this thread back to life, bujt im having same issue. (probook 4530s)
after replacing lcd panel i got same error, used tool to reprogram p/n s/n and ct number, still when it asks configID dont know what to do, If i enter nothing it gives default Config id A0001C02, that was before there also.
even with 3/4 right problem is resolved but dont want any other problems in the future, also it wont boot into bios always with F10 maybe 1/5 time, always system diagnostics screen coming with memory test harddisk test etc. tried flashing f50 bios again but no help.
i guess has someting to do with invalid ConfigID
