cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
TBKJ
New member
1 0 0 0
Message 1 of 2
303
Flag Post

I am getting P2PP BurnBoot Check failed

HP Recommended
HP 250 G3
Microsoft Windows 8.1 (64-bit)
I performed recovery using recovery disks and it failed .In details it is stating P2PP BurnBoot failed.
What should I do ?
0 Kudos
1 REPLY 1
IT_WinSec
Level 15
Level 15
9,962 9,858 797 3,832
Message 2 of 2
Flag Post
HP Recommended

Hello,

 

Thank you for posting in the HP Support forum. Welcome !

 

 

1. Please, shutdown the computer using the power button

2. Power it on.

2.1 As soon as you press the power-on button, immediately begin hitting the Esc button (like tap-tap-tap).

This should open a HP Startup Menu which may look similar to this one

 

3. Choose F10 to open BIOS setup

 

4. Navigate through the options and reset the BIOS to default settings

Also, check this thread > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Getting-p2pp-burn-boot-check-fai...

 

and revert the BIOS time to something like an year before now or to 2012 or 2010.

5. Save the changes and exit.

 

6. Repeat the steps above, choose F9 to boot from the recovery media and hopefully it will work

>> Your FEEDBACK is important. Click below on Accept As Solution or ThumbUp+ buttons if my comments helped or to say thanks <<
*** I work for HP *** I express personal opinion only *** HP Expert - Volunteer since 2013
0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation