• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended

Laptop: HP Pavilion DV6-7001TU

OS: Windows 7 Home Premium

 

HP support assistant recently recomeneded a BIOS update and I went ahead and did that. After the BIOS updaet when I press the power button the computer does not start (the power button lights up, the CD ROM is checked/starts) but nothing on the screen.

 

Please help asap! The flash update was InsydeFlash

 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Sorry for not adding that.

 

I was standing right there so I saw what he did.

 

  1. He took out the battery, the memory, the HDD.
  2. Unplugged the power cord.
  3. Behind the memory card was the BIOS, he used a tool to read the BIOS number, which he then used to find an old chip (this part is assumed).
  4. He took out a very small part out of the old chip (was the thickness of two human hairs I think).
  5. Used a blower that blew heat at 400+ degree celcius, and used a tweazer to put the old chip over the one on the laptop, on enquiring he told that he did a hard reset on BIOS and is now flashing a new BIOS into the chip.
  6. After doing this he threw the old chip out, left the laptop to cool (he threw the chip he found on step 4, the laptop has the same BIOS chip it had orignally.
  7. After that he used petrol, and cleaned the BIOS, the memory connectors, the wifi connectors, the HDD connectors and reset system time by removing and then pluging in the system battery.
  8. Put the battery back in and started the computer and vola! everything started working as normal, except that I had to re-configure a few settings in the BIOS (to my liking) and correct the system time. 

I hope this helps.

View solution in original post

7 REPLIES 7
HP Recommended

I will pass this along to HP representatives.
Which Insyde BIOS version did you install that caused the issue?

 

You might want to try a hard reset as follows:


1) Remove the battery and unplug the DC power adapter.
2) Press and hold the power button for more than fifteen seconds.
3) Plug in the DC power adapter (leave the battery out for now)
4) Press the power button

Please post your positive or negative results here in your thread.



I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"



HP Recommended
HP Recommended
I have looked high and low, so far HP has not provided a way to create a bootable USB and redo the BIOS. I spent over a thousand dollars on this machine, did what the HP support assistant told me to do, and now I am left without a laptop high and dry.

Please, if someone know a way to create a bootable usb key that would re-do my BIOS, I will greatly appreciate it!
HP Recommended

Just went out and got it repaired, spent $60. Job done.

HP Recommended

How was it repaired? 

 

How about sharing the details.



I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"



HP Recommended

Sorry for not adding that.

 

I was standing right there so I saw what he did.

 

  1. He took out the battery, the memory, the HDD.
  2. Unplugged the power cord.
  3. Behind the memory card was the BIOS, he used a tool to read the BIOS number, which he then used to find an old chip (this part is assumed).
  4. He took out a very small part out of the old chip (was the thickness of two human hairs I think).
  5. Used a blower that blew heat at 400+ degree celcius, and used a tweazer to put the old chip over the one on the laptop, on enquiring he told that he did a hard reset on BIOS and is now flashing a new BIOS into the chip.
  6. After doing this he threw the old chip out, left the laptop to cool (he threw the chip he found on step 4, the laptop has the same BIOS chip it had orignally.
  7. After that he used petrol, and cleaned the BIOS, the memory connectors, the wifi connectors, the HDD connectors and reset system time by removing and then pluging in the system battery.
  8. Put the battery back in and started the computer and vola! everything started working as normal, except that I had to re-configure a few settings in the BIOS (to my liking) and correct the system time. 

I hope this helps.

HP Recommended

Glad you got it recovered. A tip that may save you $ in the future_Your model has UEFI which supports BIOS recovery at boot:

 

http://support.hp.com/us-en/document/c02693833=

**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.