Laptop fails to boot to Windows screen.

[Cashmanian]

My laptop will not start correctly. It starts up, says that it is "diagnosing your pc" and then goes to the Automatic Repair Screen. I have tried the various Advanced Options without success. I do not have any recovery discs. When I tried "Reset your PC", it failed at 28%. I have looked at the possibility of purchasing a Recovery Kit but am concerned that if I need to re-input the Windows Product ID, it is not on the laptop case.

Is there any simple solution for Windows 8.1?

I have just run the HP PCDiags and the hard drive has failed with the Failure ID 0LVPU8-6NF8LE-MFKT1A-60R703.

[WAWood]

@Cashmanian

Hello;

Allow me to welcome you to the HP forums!

Sorry to be the bearer of bad news, but according to HP, that error message means that your primary storage drive (i.e., hard drive) is in imminent danger of failing. While it could last for several more days, it could also fail immediately! The more you use the drive, the less likely you'll be able to recover anything on it.

So, there are four issues to address here:
1) Data Recovery
2) Drive replacement
3) Recovery Media
4) System restoration

---------- Data Recovery ----------

Your best bet for recovering data now is to do the following:
1) Remove the hard drive from the PC
2) Purchase a USB-to-Hard Driver adapter kit
3) Download and install this utility on a working PC: http://www.majorgeeks.com/news/story/recover_data_in_3_steps_with_minitool_power_data_recovery_free_...
4) Connect the old drive to the working PC
5) Run the data recovery utility to see what can be retrieved from the old drive.

If that tools does not find what you need, an alternative is Recuva: http://www.piriform.com/recuva

And, if that does not work well, the best tool out there is this one, but only the trial version is free: http://www.file-recovery.com/

---------- Drive Replacement ----------
The drive will need to be replaced. When you remove it, you will see that it is a 2 1/5 inch laptop SATA drive.

You can replace this with any similar laptop drive of the same capacity or larger.
---------- Recovery Media ----------

Once you have the replacement drive, you will need to use something known as HP Recovery Media to restore your PC to working condition. This is a set of DVDs and a CD, or USB stick, that will erase the hard drive (removing all data, settings, and applications, reinstall the original OS, drivers, and some HP Utilities. In some cases, you may be able to order a USB stick instead of disks. You have to order these from HP; they can not be downloaded.

You can look online for Recovery Media starting with the linked paged: http://support.hp.com/us-en/drivers

Once there, input your Product name or number. On your Software and Drivers Download page, select your Operating System and and Version. Click "Update". If HP Recovery Media is available for your machine, down near the bottom of the page, you will see an entry for Order Recovery Media-CD/DVD/USB. Click the "+" symbol to expand that entry and click on Order Media for details.

Or, if you prefer, you can do the same by contacting HP Customer Service:

If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

NOTE: After you get through, stay on the line until you are finally able to talk to some one -- it can take a while!

If you have trouble finding a phone number, then try: 1 (800) 474-6836

If HP no longer provides Recovery Media for your model, a couple of other sites you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

---------- System Restoration ----------

While you are waiting for the media to arrive, read through this: http://support.hp.com/us-en/document/c00006110

Good Luck

[Cashmanian]

Thanks for the comprehensive advice. Whilst waiting, I used F11 to try restoring from the System Recovery Sector and amazingly, it worked. The laptop is back up and working. I will however create recovery discs before the hard drive fails.

Cheers.

[WAWood]

@Cashmanian

I am happy to hear that your PC is back in working order!

But, let me pass along some advice regarding doing image backups.  I do this every week and have found the tool mentioned below to be invaluable:

Macrium Reflect (MR) provides a FREE version that can be used to image and restore partitions or entire drives: http://www.macrium.com/reflectfree.aspx

What I recommend is the following:
1) Download and install Macrium Reflect (MR)
2) Run MR and choose the option: "Create an image of the partition(s) required to backup and restore Windows" to write a full backup to an external drive or USB stick
3) Use the option to create a boot USB stick or CD

My experience is that MR, when using the High Compression option, typically can compress the saved image file to about 50% of the USED space in the OS partition. This means if you have an 80GB OS partition, and 40GB is used, MR only needs about 20GB to store the image file.

I use this all the time and it typically takes less than 15 minutes to do the image backup and about the same time or less to do a restore.

Plus, MR has the option to Add a Recovery Boot Menu entry. This allows you then to boot into WinRE, and you can then use that to do a restore -- when you can't boot into Windows!

NOW, you have the means to restore a full working system from the external drive or USB stick in only a few minutes.

Good Luck