cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
kadamay21
New member
1 0 0 0
Message 1 of 2
476
Flag Post

No operating system found how can I reinstall 1 without following on screen instructions?

HP Recommended
HP NOTEBOOK PAVILLION pv6 Win7
Microsoft Windows 7 (64-bit)

Message no operating system found . Startup test memory is find  error data page 1501 then rest of the page no data.

bios vendor is INSYDE . Version Is F1 or something it's covered now with a yes or no selection I can't select

0 Kudos
1 REPLY 1
WAWood
Level 16
Level 16
30,382 30,289 2,764 6,692
Message 2 of 2
Flag Post
HP Recommended

@kadamay21

 

Hello;

Allow me to welcome you to the HP forums!

 

These problems are generally due to one of two basic problems:
1) Failed hard drive
2) Corrupted/missing boot loader files

As to the first, please follow the directions in this link for testing your hard drive: http://support.hp.com/us-en/document/c00439024

If your BIOS does not have those options, they try pressing the Esc key repeatedly while booting your PC and when the HP utilities menu comes up, choose drive diagnostics.

If those confirms your drive has failed, then you need to replace it. Please report back if that is the case.

As to the second, you will need access to a working PC for this step in order to create the media needed to repair your PC boot loader.

You will need to create something known as a Win7 Repair CD. This will repair the boot loader files, and if that is the problem, your PC will boot OK after that. This can be obtained (for a fee) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/

When you download this file, it will be an ISO file.

To make a bootable CD from it, you will need to download and install ImgBurn: http://www.imgburn.com/

Once you have that installed, run it, select the option "Write image file to disc" and select the ISO file you downloaded, and point it to a blank CD.

To make a bootable USB stick from it, you will need to download and install RUFUS: https://rufus.akeo.ie/

Once you have that, run it, in the Device entry, use the pulldown to select the USB stick. Down near the bottom right, where is says "Create a bootable disk using", select the ISO file you downloaded.
-------------------------------------

Boot from the media you created, and follow the directions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html

You will probably have to run Startup Repair three times for it to fix all the boot loader problems.

When done, your PC should boot OK. If it does not, there is a more serious problem.

Good Luck

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation