-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Notebooks Archive
- Problem with camera not being found

Create an account on the HP Community to personalize your profile and ask a question
04-21-2026
12:21 AM
- last edited on
04-21-2026
01:15 AM
by
SteffenBaierUK
I had a previous support case with the number >Do not include the product serial number or any private information< about my camera not being found. After much troubleshooting a reimage was requested, I don't believe this was necessary and did further troubleshooting.
The evidence points to a likely camera stack, firmware, or hardware-path issue affecting the main RGB webcam specifically:
Windows Hello still works using the separate IR camera, but the main webcam does not work in Camera, Teams, or other apps.
Windows reports error 0xA00F4244 and Settings shows no camera attached.
Device Manager shows the webcam device and Intel camera driver loading, but Windows does not expose it as a usable camera to applications.
HP Hardware Diagnostics for the camera failed.
DISM and SFC both completed successfully.
Nvidia driver removal/reinstall and Memory Integrity off made no difference.
I have also found public evidence that recent Intel Meteor Lake laptops using MIPI/IPU6 camera stacks and the OV08X40 sensor have documented low-level initialization problems, including cases on HP Spectre x360 Meteor Lake systems where developers reported the sensor was not responding because it likely failed to power on correctly. Similar Meteor Lake/IPU6 camera power-controller issues are also publicly documented on Dell systems. Dell also documents that Windows MIPI camera failures can present exactly as “camera not found” or “no camera attached” symptoms. (Libcamera Lists)
Given that HP diagnostics already failed the camera, and only the IR/Hello path is working, I want this reviewed as a likely RGB webcam module / cable / firmware / IPU6-MIPI initialization issue, not only as a generic re-image case.
Before I agree to erase and rebuild the laptop, please confirm in writing:
whether this case can be escalated to a higher technical or repair team,
whether HP will proceed to hardware inspection or service if re-imaging does not resolve it, and
why HP Hardware Diagnostics failing the camera test is not being treated as possible hardware-path evidence.