Insert flash drive into locked laptop and boot. ”If an HDD is installed remove before booting.”
At C:\OUTPUT type CD.. “Then hit enter”
Type HPBR “Then hit enter”
First thing is to save your settings.
Select #3 re-program.
Press “S” to save system information.
Type HPBR and hit enter.
Select “FIRST RUN”
Then select model.
After reboot repeat same as above but this time SELECT, “SECOND RUN”
If you cannot boot from USB flash drive use Options in the Image tool to build a HDD.
Then use the drive to boot the program on the locked laptop.
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.