Do you receive an error message for the battery (like plugged in and charging, etc.)?
Is the battery not holding a charge? Does your laptop shutdown if the charger is disconnected?
Meanwhile, Let us run a hardware test on the battery by following these steps.
Hold the power button for at least five seconds to turn off the computer.
Turn on the computer and immediately press the F2 key repeatedly, about once every second.
The HP PC Hardware Diagnostics (UEFI) main menu is displayed.
Figure : HP PC Hardware Diagnostics (UEFI) main menu
Select Component tests.
Figure : Component Tests options
Select Power. There are two different power tests available, the AC Adapter Test and the Battery Test. Then choose the battery test.
Battery - The Battery Test checks your system to make sure that the battery is functioning properly. It tests the battery and allows you to run calibration if needed. The Battery Check test time is 2 minutes. Battery Calibration time is 2 to 4 hours.
To run the battery test and for battery information, follow the steps in Battery Test.
If the battery test passes then please calibrate the battery: http://hp.care/2nZrk3c (The steps are the same for Win8 and Win10)
Feel free to let me know the results. Cheers! 🙂
This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.