cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Rody2
New member
6 4 0 0
Message 1 of 5
300
Flag Post

bios password HP Envy M7-k111dx

HP Recommended
Envy M7-k111dx
Microsoft Windows 8.1 (64-bit)

Need to change my boot sequence and not able to get past the BIOS pwd screen. After 3 errors, the error code is i 92995584 , Bios version F.43 please help...

0 Kudos
4 REPLIES 4
GBL84
Level 10
4,161 4,158 563 1,310
Message 2 of 5
Flag Post
HP Recommended

Please try this Password :  

23693500

 

 

Steps to be followed:

  1. Use the unlock code posted above to enter the BIOS
  2. Disable all passwords that are enabled
  3. If asked for current password - type the unlock code
  4. For new password, just press ENTER key
  5. Repeat the same for verify password column.
  6. Then leave the BIOS by saving & exit option to save the changes.

 

Hope this helps, for any further queries reply to the post and feel free to join us again !!

 

 **Click the White Thumbs Up Button on the right to say Thanks**

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

 

Thank You,

GBL84

I am not an HP Employee 

0 Kudos
Rody2
Author
New member
6 4 0 0
Message 3 of 5
Flag Post
HP Recommended
Distinguished Professor Thanks, but that code did not work, please my operating system is dead and I can not install, I'm desperate, please help me, the disabled system code is exactly (i 92995584) with that letter i in front, before updating the bios yesterday to F.43 was not that letter, I do not know why the difference, thanks
0 Kudos
GBL84
Level 10
4,161 4,158 563 1,310
Message 4 of 5
Flag Post
HP Recommended

Troubleshooting:

Incase if the Password doesn’t work please try a Hard Reset as follows.

1. Shut down the notebook

2. Unplug the AC Adapter and then remove the battery

3. Hold  down the Power button for 30 seconds

4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook

5. If you now see a password box, Please type the same password I shared before & press enter

 

 

Hope this helps, for any further queries reply to the post and feel free to join us again !!

 

 **Click the White Thumbs Up Button on the right to say Thanks**

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

 

Thank You,

GBL84

I am not an HP Employee 

0 Kudos
Rody2
Author
New member
6 4 0 0
Message 5 of 5
Flag Post
HP Recommended
Thank you again, sorry but that procedure did not work either, I'm quite disappointed to have bought an HP laptop, I've had several other brands and I've never had problems modifying the bios, I hope I have a solution and someone in this forum can really help, I really appreciate your time, if you have any other ideas ...
0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation