hp mini 1000 bios password reset code

[LiStEn3r]

I just bought an old hp mini 1000 model number :1151NR . It has a bios password on it and the fatal error... System halted
CNU92805B8.
Could someone please send me a code like all the others in the past, to help me reset this, please?

[KNRK]

Please enter = e9lo7u1qpu

Regards,

KNRK

I work for HP

[KNRK · Accepted solution]

Steps to be followed:

1. Use the unlock code posted above to enter the BIOS
2. Disable all passwords that are enabled
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.
6. Then leave the BIOS by saving & exit option to save the changes.

Troubleshooting:

Incase if the Password doesn’t work please try a Hard Reset as follows.

1. Shut down the notebook
2. Unplug the AC Adapter and then remove the battery
3. Hold  down the Power button for 30 seconds
4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook
5. If you now see a password box, Please type the same Password I shared before and press enter

Hope this helps, for any further queries reply to the post and feel free to join us again

 **Click the White Thumbs Up Button on the right to say Thanks**

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Thank You,

K N R K

Although I am an HP employee, I am speaking for myself and not for HP

[LiStEn3r]

You are awesome, K N R K! I now have a user password to figure out. Any chance you can help me with this also?

[KNRK]

Please tell me what is the issue so I can check and let you know if I can help you with another issue

Regards,

KNRK

I work for HP

[LiStEn3r]

I uninstalled the " power on " password, as well as the administrator password ( these were the only two passwords that were listed ). I have now run into the username password, which my friend has long since forgotten. How do I reset this?

[GBL84]

It looks like you are not able to Boot into the Operating System on your Notebook.

We will surely assist you with this.

Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now

As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition

is in a working condition or not, If yes you can easily recover/restore your Notebook

If Recovery Partition is corrupted

You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest

OR

You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest

I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay

NOTE : Please arrange for external USB optical drive as the unit doesnt have one.

Hope this helps, for any further queries reply to the post and feel free to join us again

Regards,

GBL84

-------------------------------------------------

Although I am an HP Employee, I am speaking for myself and not for HP

If my POST has helped you, Please click the 'White Thumbs Up Button' to say Thanks!!

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem