Automatic Adjustment ADF

[ibfrenchy]

Using Scanner, A/S Chart No.2 Letter – Part # JC68-02475A

Enter Service Mode

• From Control Panel, Select SUPPORT TOOLS and SERVICE
• Enter the Service PIN ID
  • E876xx      04087617
  • E825xx      04082517
  • E778xx      04077817
  • E725xx      04072517

• Select SERVICE TOOLS

• Select DIAGNOSTICS

• Select ADJUSTMENTS>SCAN AREA ADJUSTMENTS>AUTOMATIC ADJUSTMENT – SCAN GLASS
• Using your Scanner, A/S Chart – Note the lead edge arrows point to the side of the scanner glass
• Press OK and unit scan begins – the new values are saved to the unit

For an GX/Flow Model ADF

Enter the Service Mode

• From Control Panel, Select SUPPORT TOOLS and SERVICE
• Enter the Service PIN ID
  • E876xx      04087617
  • E825xx      04082517
  • E778xx      04077817
  • E725xx      04072517

• Select SERVICE TOOLS

• Select DIAGNOSTICS

• Locate Scanner A/S Chart
• Place Scanner A/S Chart in the Flow ADF Tray
• Press OK – Scan begins, and the system will automatically apply new value

Thanks Bill

[GaryL1]

Where does one get the calibration chart?

[SD_MTL]

This can be ordered through GCSN.

The part # for the test chart kit is X3A92-67925.

Thank you.