Printer is acting dramatic

[_SP]

Heyy guys 

soo I have a deskjet 3054 and it’s acting like it’s  Completing scan/ print jobs without anything really happening after I just changed the ink.

•paper is loaded with a tap tap to maker sure it’s on the right spots 

• page shows up where it should on my desktop

•the paper loads to the proper starting place

*proper loading sounds happen* 

*proper sliding of the ink cartridges sound*

That’s it.  

I think it’s a paper thing. I’m not sure it’s a program problem. Any ideas? 

[sandytechy20]

@_SP

Welcome to the HP support community.

Are you getting any error messages?

When did this issue start?

Meanwhile:-

Perform a power reset

1. Turn on the printer, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Wait at least 30 seconds.
5. Plug back the power cable straight to a wall outlet and printer without any surge protector.
6. Turn on the printer.

Use HP Print and Scan Doctor to fix connectivity and printing issues.

Download HP Print and Scan Doctor.

1. Run HPPSdr.exe from the download location on your computer.

2. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

   • If your printer is not in the list, turn it off and on, and then click Retry.

   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

3. If a screen prompts you to turn on printer updates, click Yes.

4. If a screen prompts you to make your printer the default printer, click Yes.

5. Try to print.

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.