Wont print

[Luis_Wolfpack]

Printer says it has no paper therefore it wont print but it has paper

[Max3Aj]

@Luis_Wolfpack, Welcome to HP Support Community. 

Thank you for posting your query, I will be glad to help you. 
If your HP LaserJet M110w is showing a "No Paper" error despite having paper loaded, try the following troubleshooting steps:

Check the Paper Tray

>Ensure the paper is properly loaded in the input tray.

>Adjust the paper guides so they are snug but not too tight against the paper.

>Avoid overfilling the tray—keep the stack below the maximum fill line.

Use the Correct Paper Type

>Make sure the paper type matches the printer’s specifications.

>Avoid using wrinkled, torn, or damp paper.

>Try a fresh stack of paper to rule out paper quality issues.

Check for Paper Jams

>Open the input and output trays to inspect for any jammed or stuck paper.

>Remove any small scraps of paper that may be triggering a sensor.

Reset the Printer

>Turn off the printer, unplug it from the power source, and wait for 60 seconds.

>Plug it back in and turn it on.

Clean the Paper Feed Rollers

>Open the printer and locate the paper feed rollers.

>Gently clean them with a lint-free cloth slightly dampened with water.

>Let them dry completely before loading paper again.

Check Printer Settings

>On your PC, go to Devices and Printers → Right-click on your printer → Printer Properties.

>Make sure the correct paper size is selected in the settings.

Update or Reinstall Drivers

Go to HP official website and download the latest drivers for the LaserJet M110w.

Uninstall and reinstall the printer software if necessary.

I hope this helps. 

Take care and have a good day. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping! 

Max3Aj

HP Support