-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
1
0
0
HP Recommended
HP Recommended
Hinge replacement is actually pretty straight forward and if you are careful you do not need to completely remove the ADF to replace the hinge. A helper makes this job much easier. Open the lid and remove the four screws that hold the hinge to the ADF itself. remove any broken pieces, have your helper hold the lid out of the way as much as possible without damaging the cables and then lift up the piece of hinge left in the body of the printer and use a small screwdriver to depress the tab on the front side of the hinge and lift it out of the body. (see picture below). Then insert the new hinge and screw everything together.
If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
