Envy 5052 printer says it's not connected to computer but its printing a form but without what I typ

[jockeyeba]

It shows - printer not connected but it's printing.......what am I doing wrong

[Jay_G24]

Hi @jockeyeba,

I'd like to help!

To better assist you - 

1.) Are the printer and Mac connected to the same network?

2.) Is your router dual-band enabled i.e., both 2.4GHz and 5GHz? If yes, make sure the dual-band has different SSIDs for 2.4G and 5G networks.

3.) What is the distance between the router and the printer?

4.) Is there an antivirus software installed on your Mac?

5.) Could you perform a ping test using the Mac Network Utility and let me know the results? Use the printer IP address to perform a ping test, the printer IP can be located by selecting the wireless icon on the printer display.

Perform a ping test to check the connectivity

1.        Obtain the IP address of the printer by clicking on the Wireless icon on the printer

2.        On the MAC Go to Spotlight > search for Network utility > select Ping tab > enter the IP address of the printer in the box

3.        Check the second box that says Send only > 10 pings

4.        Click on ping > Check the results at the end if any packets are lost

5.        Note: There should be 0% packet loss, share the results in your next post.

 Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping