Printer psc 11100

[NORWAY11]

Out of paper is displayed on the PC and it's impossible to remove and will not print

Scanning and copying functions OK and there is plenty of paper available,

Have tried to remove the printer from the computer and then reinstall it, but same problem continues.

Any proposals??

[Kumar0307]

@NORWAY11, Welcome to the HP Support Community!

If you are able to make copies on the printer, it means the hardware of the printer is working fine. Let us try these steps to resolve this issue:

Run HP Print and Scan Doctor to diagnose and fix any driver issue

Click here to download the file. Once downloaded, make sure to run the file to start the installation and click on 'Fix printing'.

If the issue persists, proceed to the next step.

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Clean reinstallation of Pre-installed HP drivers

1.  In Windows, search for and open Programs and features 
2.  Select your HP Printer 
3.  Select Uninstall 
4.  In Windows, search for and open Devices and printers 
5.  In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 
6.  Open up the run command with the “Windows key + R” key combo. 
7.  Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”) 
8.  Click on the “Drivers” tab 
9.  Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 
10.  Select Ok 
11.  Select Apply and Ok on the Print Server Properties windows 
12.  Close Devices and Printers, restart the computer.

Install the printer using Windows built-in driver

Refer to this document to know how. Try printing.

Let me know how this goes.

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!