HP LaserJet 200 colorMFP M276nw - No PMF Support

[MJWaters1985]

As I've seen with other owners of the HP LaserJet 200 colorMFP M276nw, I upgraded my wireless network.  All my devices were successful in connecting to the new kit, except the printer.  After researching, I found this thread on HPs site:

 https://support.hp.com/us-en/document/c05240288

I know the passphrase is correct, so I proceeded to check for a firmware update.  My printer is on version 2019-04-01, which is the most recent build available from HP.  I was able to disable PMF on my wireless network, which enabled my printer to connect.  Obviously, this is less than ideal, and I need to re-enable PMF.  That said, I'm asking that HP provide an updated firmware that supports PMF, as this seems to be a somewhat common issue.

[Jay_G24]

Hi @MJWaters1985,

I'd like to help!

The printer is not compatible with PMF technology.

And, we do not have any information about when the new firmware will be released or if it will support PMF.

Hope this helps!

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

[MJWaters1985]

@Jay_G24 - I appreciate the response, but it just reiterates everything I said in my original post.  It would be really helpful to understand if HP is abandoning this device, or if owners should expect a firmware update to address this omission.

[Repairatrooper]

At 8 years of age and likely at this point considered an end of life product do not expect that HP will devote much in the way of resources to a home product like this.