Edge-to-Edge printing

jmmitche1984 · ‎06-01-2016

I have a M9050 MFP that we use to print on pre-printed forms. The Windows 7 32-bit PCL6 driver has the Edge-to-Edge option in Printing Defaults\Advanced and the form prints perfect. The Windows 7 64-bit PCL driver does not have this option. I know the printer supports it (it is in the manual), but the 64-bit driver has it removed. Does anyone know if there is a 64-bit driver with the edge-to-edge option available?

SHThompson · ‎06-01-2016

If you are using pcl6 I would try pcl5 or vice versa.

Also if you are using a machine specific driver then I would try the universal print driver and once again try the opposite if appropriate.

If my post resolves your issue please click the accepted as solution button under it.

To thank a Tech for a post click the thumbs up button under the post.

You can even click both buttons. . .

jmmitche1984 · ‎06-02-2016

I was able to find the M9050 PCL5 64Bit Driver. Now the 64bit machines print fine to this printer (Edge-to-Edge on). But...The 32bit machines in my environment are now slightly off because I adjusted the registration of the tray. So now I need to find the 32bit version of the device specific driver. Does HP have a driver store for older drivers?

Reskape · ‎06-03-2016

Hello @jmmitche1984

Available drivers for the unit can be found here

http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=404864&swLangOid=8&swEnvOid=4063

Although I am an HP employee, I am speaking for myself and not for HP.

Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution .

Create an account on the HP Community to personalize your profile and ask a question