cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
JurgenTh
New member
1 0 0 0
Message 1 of 2
3,201
Flag Post

Get the error 0xc18a0206 when starting up

HP Recommended
HP Photosmart C7180
Microsoft Windows 7 (64-bit)

Get the error 0xc18a0206 when starting up. Done reset, didnt

0 Kudos
1 REPLY 1
Jeet_singh
Retired
Retired
21,068 21,032 1,398 2,343
Message 2 of 2
Flag Post
HP Recommended

Hi @JurgenTh,

 

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for the First Time Here? Learn How to Post and More.

 

I see from the post that you are getting a '0x' error message on your HP Photosmart C7180 printer. Don't worry as I have a few steps to help you get through this concern,

 

Let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

Remove all the ink cartridges and then try to perform a hard reset on the printer.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Now insert the ink cartridges and then try to print a test page and check if it works.

 

If you have followed the steps and still having the issue, I would suggest this could be a printer hardware. I would recommend you contact our HP phone support for available service related options. If your product is out of warranty, please choose paid options to get the tech support number.

 

Please use the following link to create yourself a case number, then call and it may help speed up the call process:

Step 1. Open link: www.hp.com/contacthp/

Step 2. Enter Product number or select to auto detect

Step 3. Scroll down to "Still need help? Complete the form to select your contact options"

Step 4. Scroll down and click: HP contact options - click on Get phone numberCase number and phone number appear.

They will be happy to assist you immediately.

 

 

Keep me posted,

If the information I've provided was helpful,

give us some reinforcement by clicking the solution and kudos buttons,

that'll help us and others see that we've got the answers!

Good Luck.

 

 

Jeet_Singh
I am an HP Employee

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation