HP OfficeJet 4650 Error Code 0XC4EB8556 HW_MICCI2 C

[JustOrtho]

Stand alone Printer/Fax, used as Fax only.

Get Error Messgage "Error Code 0XC4EB8556 HW_MICCI2 C" and suggests to restart Printer/Fax.

After restart, appears to clear error message temporarily, then message reappears again after a few minutes.

Anyone know what is going on?

[Betty0610]

@JustOrtho

Let's try to reset the Printer here:

Turn the printer on, if it is not already on.

1. Wait until the printer is idle and silent before you continue.
2. With the printer turned on, disconnect the power cord from the rear of the printer.
3. Unplug the power cord from the wall outlet.
4. Wait at least 60 seconds.
5. Plug the power cord back into the wall outlet.
6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Also, try connecting the Printer to a different wall outlet directly.

If the issue persists, I recommend you to contact the HP Support Team as this could be a hardware issue.

Link: https://support.hp.com/us-en/contact-hp?openCLC=true

Note:  Select the country accordingly to get the contact details for support.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!