HP laserJet 1022n How can I change IP adress?

[Dugarry]

HP laserJet 1022n How can I change IP adress?

[PrintDoc]

It is advisable to set a static IP address for the printer:

- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.

Now, shut down the router and printer, start the router, wait, then start the printer.

After this you may need to redo 'Add a Printer' using the new IP address.