How do I print Avery 74520 namebadges on 4.25" X 11" stock w/HP 4630?

[robertavirta]

The stock size for these labels is 4.25" X 11" and I am only able to print on 8.5" X 11" paper.  The print and properties box does not contain a "custom setting" for paper size so am only able to print the image in the middle or left margin of an 8.5" X 11" inch sheet.  The printer does feed the stock in the middle adjustment but only prints as though the paper setting was 8.5" X 11.  When I leave the paper guide to 8.5" the printer will not feed the stock correctly and will spit out a blank with the error that it does not recognize or print a smaller size.  If this is true I will give up, but logically thinking I should be able to make it work.

[doughjohn]

Hi

I dont know if this would be helpful or otherwise

In Libreoffice (free download) there are options to select Avery labels which can be customised

and it might just do what you want.

I realise I am a bit light on detail(s), so

If in doubt please ask.

PS: The image takes a while to get approval.