How to configure ePrint on LaserJet CP1025nw Color Printer

[Alexander2604]

Solution found:

How to Configure HP ePrint on the LaserJet CP1025nw Color Printer

System:     Windows  (Widows 7)

Step 1 – Install Printer

Install the CP1025nw Printer to USB, Wifi or Ethernet.

(Printer needs to print correctly in order to pass to the next steps).

Step2 – Check Firmware Version

Press the “Info-Button” on the CP1025nw LaserJet for five seconds.

The printer will print two info pages.

Look at the first Page on the top-left for Firmware Version

Firmware version must be 20120103 or higher.

Step 3 – Update Firmware

Download Firmware Update utility (LJCP1020_FWUpdate_signed.exe) from the following link:

Utilidad de actualización del firmware de HP LaserJet CP1025nw

or

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-5&cc=es&dlc=es&lc=es&...=

Execute the Utility on the computer were the CP1025nw LaserJet is correctly installed.

Find the CP1025nw Printer on the list. The selection Window might show the printer several times depending on how the printer was installed. Select one option and press the button “Update One”.

Step 4 – Retrieve the Printer Code for your CP1025nw Printer

ATTENTION:

The “Host Name” of the printer is not the “Printer-Code” you need  for ePrint setup.

To retrieve the Printer-Code you must run the ePrint-Setup-Wizard-Utility.

To download of the utility, go to the link: http://www.hp.com/go/ePrint .

Find the “HP LaserJet Pro CP1020 Color Printer Series” option in the Drop-Down-List.

Click “Windows” to download the wizard (EPrintSetupWizard.exe ).

Execute the Wizard on the computer where the CP1025nw Printer is correctly installed. After running the wizard press the “Info-Button” on the CP1025nw LaserJet for five seconds. The printer will print three info pages. The third info-page offers the Printer-Code you need for ePrint setup. The code is valid for 24h only. When time elapses you have to reprint the info-pages to get an actualized Printer-Code.

Step 5 – Get Printer Email for your CP1025nw LaserJet

In order ePrint on your CP1025nw Printer you need to assign an email address to your Printer. To do this, go to the following link: http://www.hpeprintcenter.com/

Log in with your HP-ID. If you don’t have one, register for a new account.

When logged in, click on “Add new Printer”-button. You will be asked to enter the Printer-Code. (On how to get the Printer-Code, see step 4).

While evaluating the Printer-Code, be patient, the program needs its time.

When the Printer-Code is accepted, you can assign an email address for your CP102nw5 LaserJet. Done this, your con print your CP1025nw Printer just by sending the documents per email to the email-address of your printer.

Done.

[MAX25]

In order to configure my printer for E-Print, my Firmware version, according to Hp, must be 2012.... or higher.  Mine is 20100510.   is there a way to up date my version for Firmware in order for me to set up E Printing.  I am a newbee to this computer stuff and am trying to do it on my own.  Any help is appreciated

[Ciara_B]

Hi Max, check out the link below...

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052972

Hope this helps

Ciara