Create an account on the HP Community to personalize your profile and ask a question
04-24-2017 11:46 AM
Hello !! I tried to print at 1,200 dpi and I could not, I made a new profile of 18 passes (the plotter activates the 1200 dpi function) but at the moment of selecting the 1200 option the rip SAI FLEXI 12 sends an error that says " Current print does not support 1200 x 1200 resolution "and I can not print. Attach pictures of screen messages. regards
04-25-2017 04:55 PM
I suspect your problem mainly caused by measurement in cm :
I recommend you change your image size to from cm to inch instead. at least to try & pin point the problem.
lower dpi from the editing software, make sure right image size & dpi 300, never use 32 bit color depth....
cmyk, rgb etc causes unmatched colors, but not print error.
yes, if you print photos, giclees etc & you must use right color setting & proper printer color profiles.
HP color profiles for different medias were pretty good & myself been using them on my Z3200, Z3100 printers all the time.
Relax tranquillo... check all settings carefully before send it to print.