• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended
HP ENVY7645
Windows

Will not 2-side printing with the setting on 2-sided?

7 REPLIES 7
HP Recommended

Hello vfever, 

 

Please try the below steps that should help you print in duplex ..

 


-Load the paper into the input tray. Make sure it is Letter size paper.

-Open the document that you want to print.
-Click File, and then click Print.
-Click Properties.

       On the Layout tab, click the drop-down list for Print on Both Sides, and then click Flip on Long Edge for portrait    

       orientation () or Flip on Short Edge for landscape orientation


-Click OK.
-Change any other desired print settings.
-Click Print or OK. Your printer prints on both sides of the page for the current print job.

Regards,
Jabzi

Give Kudos to say "thanks" by clicking on the "thumps Up icon" .


Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
HP Recommended

On the printer, where should the settings be set for 2-sided printing?

ENVY 7645

 

Thank You

HP Recommended

The only 2-sided setting I am aware of on the printer itself is under the Copy menu.   I believe print jobs get this strictly from the print driver as defined in the response above.

Though I work for HP, My posts express MY opinion, and not those of HP.
HP Recommended

Hello, 

 

Under COPY Meny you have two sided option. If enabled, the printer would make a 2-Sided copy.

 

But if you want to print a two side document using a computer, you may have to make change the driver settings. Please refer to my earlier post.

Regards,
Jabzi

Give Kudos to say "thanks" by clicking on the "thumps Up icon" .


Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
HP Recommended

Just installed HP ENVY 7645 with all the HP Printer Drivers. The printer will print 2 sided copies from my Windows 7 PC perfectly  BUT will ONLY print 1 sided when I try to copy directly from the control panel on the printer (with the two sided 1->2 option set.)

 

Printer scans one side of the document to be copied, pauses with output 1/2 way out and then when side 2 of original is loaded printer prints a blank side 2 on the copy but fails to scan side 2 of the original. Suggested solutions?

 

Mikey

HP Recommended

According to HP support copying 2 sided document to 2 sided copy can only be performed from the flatbed scanner NOT from the Auto Document Feeder. (1->2 sided copy will only work with ADF if 2 seperate one sided originals.) 

 

User manual should point this out this 2 sided copy restriction characteristic .....

HP Recommended

I am on a Mac Book in MS Word and I dont get a pref tab when I do as you say.

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.