Make sure you have removed all tape and packaging material.
Plug the printer into a power source, turn on the printer, and then set your preferences.
Ensure scanner lid is closed (key step). Picture A shows printer with scanner lid closed.
Picture A: Printer with scanner lid closed
4. Raise the ink cartridge access door from the side (either right or left, or can use both hands). Picture B shows side view of the printer, the highlighted yellow dashed line/box indicates the area where you can raise the ink cartridge access door.
Picture B: Side view of printer, yellow dashed line/box shows area where to open the door.
5. You can raise the door until you hear the "click" sound. There's a stopper at the end holding this ink access door.
6. Proceed with the rest of ink installation. You can watch the animation at control panel.
Note: You can also refer to below link(s) for reference:
Although I am an HP employee, I am speaking for myself and not for HP. Make it easier for other people to find solutions, by marking my answer with “Accept as Solution”; if it solves your issue. ****Click the “Kudos Thumbs Up”; at the bottom of this post to say “Thanks” for helping