WPS PIN FOR 3752

[Jaderabbit]

Where can I find my printer's WPS pin??? I looked all over the printer and tried every number I found and it did not work. Help!

[Rainbow23]

@Jaderabbit,

Welcome to HP Forums, this is a great place to get support, find answers and tips.

Thank you for posting your query, I'll be more than glad to help you.

I understand that you wanted to know where to find the WPS pin to connect your HP DeskJet 3752 All-in-One Printer to the network.

WPS pin will be there on the router. 

Let's go through a few steps to resolve this issue.

Before you can connect your printer to a wireless network using WPS, make sure you have following:

● A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point. NOTE: The printer only supports connections using 2.4GHz.

● A computer connected to the wireless network that you intend to connect the printer to. Be sure you have installed the HP printer software on the computer.

If you have a WPS router with a WPS push button, follow the Push Button method. If you are not certain your router has a push button, follow the PIN method.

To use the Push Button Configuration (PBC) method: 

1. Press and hold the Wireless button on the printer for more than three seconds to start WPS push mode. The Wireless light starts blinking.

2. Press the WPS button on your router.

NOTE: The product begins a timer for approximately two minutes while a wireless connection is established.

To use the PIN method:

1. Press the Wireless button and Information button at the same time to print the network configuration page, and then locate a WPS PIN. The WPS PIN is printed at the top of the printed information page.

2. Press and hold the Wireless button from the printer control panel for more than three seconds.

The wireless light starts blinking.

3. Open the configuration utility or software for the wireless router or wireless access point, and then enter the WPS PIN.

NOTE: For more information about using the configuration utility, see the documentation provided with the router or wireless access point.

4. Wait for about two minutes. If the printer connects successfully, the Wireless light stops blinking but remains lit.

You may also refer page no 56 of the printer user guide at the link: http://h10032.www1.hp.com/ctg/Manual/c05152483

You may also check the link: Find Your Wireless WEP, WPA, WPA2 Password (Windows)

Also, let us know how you are connecting the printer to the network. 

Let me know how this works.
 

You have a good day ahead.