• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Join the HP Community Solve‑a‑thon | Help Others & Share Your Solutions | Live on Zoom | 2:30 PM to 2:30 AM IST | Every Wednesday Click here to know more
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended
HP OFFICEJET PRO 7740

I don’t know what the reason is. Sometimes I see this screen after scanning few  pages. Use computer hp scan software IMG_20190815_234639.jpg

3 REPLIES 3
HP Recommended

@ckwckw02, Welcome to HP Support Community!

 

Reset the printer

In some cases, removing the ink cartridges and resetting the printer can clear the error message.

  1. Turn on the printer.

  2. Wait until the printer is idle and silent before you continue.

  3. Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.

  4. Remove the ink cartridges from the printer.

  5. With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.

  6. Wait at least 60 seconds.

  7. Plug the power cord back into the wall outlet.

  8. Reconnect the power cord to the rear of the printer.

  9. Turn on the printer, if it does not automatically turn on.

    The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

  10. Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

  11. Reinsert the ink cartridges, and then close the ink cartridge access door.

  12. If you receive a prompt to print a calibration page, do so.

  13. If you disconnected the USB cable, reconnect it to the rear of the printer.

  14. Try to print.

Service or replace your HP product if the issue persists after completing all the preceding steps.

Please reach out to the HP Support in your region regarding the service options for your printer.

 

Hope this helps!

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

HP Recommended

I have just recently encountered this error.  I have had this printer at least three years and it was happening until my printer software updated.  I have to cut my printer off and on again to remove the error.  Then, I can continue my projects.  Aggravating!

HP Recommended

ME2, than I will miss my file in scaning. I need run it at first, the book cost 500 pages and it error in half, it very hramful and toxin.

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.