-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Printers Archive
- "Printhead appears missing" on new OfficeJetPro 9025

Create an account on the HP Community to personalize your profile and ask a question

04-04-2019 06:29 PM
On setting up the new HP Office JetPro there is a Printhead Problem "the printhead appears to be missing" - "Event Code 62.80.AO" I have taken the cartridges out and reinstalled them three times, and turned the printer on and off. I cannot connect to the internet because I cannot get past this screen!
Solved! Go to Solution.
Accepted Solutions
04-06-2019 11:13 AM - last edited on 04-24-2024 07:27 AM by SofiaML
A warm welcome to HP Support Community!
Power resetting the printer and re-seating the printhead might clear the error. Here is how to do it:
1) Make sure this printer is plugged into a direct wall, not a surge protector
2) Remove the printhead for the printer and close the door. Instructions on how to remove the printhead can be found here.
3) Remove the power cord from the back of the printer (Do no press the power button)
4) Plug the power cord back into the printer
5) Wait for the printer to turn on completely, then install the printhead.
Let me know how it goes!
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!
Have a great day!
I am an HP Employee
04-06-2019 11:13 AM - last edited on 04-24-2024 07:27 AM by SofiaML
A warm welcome to HP Support Community!
Power resetting the printer and re-seating the printhead might clear the error. Here is how to do it:
1) Make sure this printer is plugged into a direct wall, not a surge protector
2) Remove the printhead for the printer and close the door. Instructions on how to remove the printhead can be found here.
3) Remove the power cord from the back of the printer (Do no press the power button)
4) Plug the power cord back into the printer
5) Wait for the printer to turn on completely, then install the printhead.
Let me know how it goes!
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!
Have a great day!
I am an HP Employee
01-02-2020 08:39 AM
Hi @shoe1
Welcome to the HP Support Community.
If the issue persists, please contact our HP Support team for Service Options as it could be a possible hardware issue:
1) Click on this link - www.hp.com/contacthp/
2) Select your product type below.
3) Enter the serial of your device.
4) Select the country from the drop-down.
5) Select the appropriate option based on your preference.
6) Fill the web-form and proceed further.
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
KUMAR0307
I am an HP Employee
