Error Code 0X0005FBB6

[VB33]

My printer has the Error Code of 0X0005BB6 and will not print and I do not know how to correct.

[sandytechy20]

@VB33

Welcome to HP support community.

Remove the ink cartridges, and reset the printer

1. Remove the ink cartridges from the printer.

2. With the printer turned on, disconnect the power cord from the printer.

3. Unplug the power cord from the power source.

4. Wait at least 60 seconds.

5. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

6. Turn the printer on.

7. Reinsert the ink cartridges, and then close the ink cartridge access door.

8. If you receive a prompt to print a calibration or alignment page, do so.

You can refer this HP document for more assistance:- Click here

(Note: Though the title of the document is different, these steps should fix the issue)

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.