• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
HP Recommended
CLX 3185FW
Mac OS X 10.6 Snow Leopard
Please note i just replaced the imaging unit by a new one, changes the toners (4x colors) and the waste toner container. However, I keep receiving the message " replace imaging unit" and nothing prints. Help..
1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Maybe try the reset.

 For reset image transfer roller, fuser follow below mentioned procedure: 1.open front door> menu #1934 menu> tech mode>data setup>clear count> password--1934> clear counts,image transfer roller, fuser etc.

Hope this will help but normally it reset when you install the new unit by closing the door.

I am A certified Copier Technician.
It is so nice to give some help where possible and the forum is a great idea Thank You.Sometimes a picture speaks louder than words to find a solution.Should you find my help use full just give some credit for my effort please.
.Thank You.Copier-Pro
If you found this post helpful, you can let others know and also show your appreciation by clicking the “Accept as Solution”button, “Thumbs up" button!

#################################################################
I'M NOT AN HP EMPLOYEE AND DO ANSWER THESE QUESTION ON MY OWN BEHALF.
#################################################################

View solution in original post

3 REPLIES 3
HP Recommended

Maybe try the reset.

 For reset image transfer roller, fuser follow below mentioned procedure: 1.open front door> menu #1934 menu> tech mode>data setup>clear count> password--1934> clear counts,image transfer roller, fuser etc.

Hope this will help but normally it reset when you install the new unit by closing the door.

I am A certified Copier Technician.
It is so nice to give some help where possible and the forum is a great idea Thank You.Sometimes a picture speaks louder than words to find a solution.Should you find my help use full just give some credit for my effort please.
.Thank You.Copier-Pro
If you found this post helpful, you can let others know and also show your appreciation by clicking the “Accept as Solution”button, “Thumbs up" button!

#################################################################
I'M NOT AN HP EMPLOYEE AND DO ANSWER THESE QUESTION ON MY OWN BEHALF.
#################################################################
HP Recommended
Thanks for the advice, worked
HP Recommended

Hello,

 I am having the same problem with my Xpress C460FW,  . any help would be appreciatd

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.