cancel
Showing results for 
Search instead for 
Did you mean: 
Usernamealready
New member
4 2 0 0
Message 1 of 2
673
Flag Post

Is there a way to update firmware without connecting to Android device?

HP Recommended
Sprocket

My sprocket will not connect to any of my devices. I suspect this is because the firmware needs updating but I can't do this without a connection. I have fully charged it, disconnected/ forgotten, reconnected, uninstalled and reinstalled the app, reset the sprocket as well as tried it on multiple devices. Any suggestions gratefully recieved.

 

Thanks

0 Kudos
Tags (1)
1 REPLY 1
sandytechy20
HP Support Agent
HP Support Agent
26,743 26,616 1,465 1,535
Message 2 of 2
Flag Post
HP Recommended

@Usernamealready

 

Welcome to the HP Forums, this is a great location to get assistance! I read your post and see that your HP Sprocket will not connect to android device. I would like to help you resolve this issue. 

 

Reset the printer.

  1. Turn on the printer.

  2. Locate the reset button near the charging port.

    Figure : Locating the reset button

    Locating the reset button
  3. Gently insert the straight pin into the reset button access point, and then press the reset button for 3 seconds.

    The printer resets and turns off.

  4. Turn on the printer.

I did some research and found that there is no firmware update available as of now for the HP Sprocket printers. If there is any firmware update released then you may update it via the sprocket app. Please refer to "Update the printer firmware" mentioned under "What if the printer does not print?" from this link.

 

Let me know if that helps.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation