cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Germanas
New member
1 0 0 0
Message 1 of 2
254
Flag Post

Dont boot BIOS

HP Recommended
HP Tablet Pro 610 G1
Microsoft Windows 10 (64-bit)

Hi every body, tablet start in black screen and show mesage orperating system boot modechange 021. Dont run BIOS.

1 REPLY 1
Photoray002
Level 15
Level 15
12,677 12,431 1,308 4,305
Message 2 of 2
Flag Post
HP Recommended

Hello Germanas

 

Usually the operating system boot modechange 021 message shows when you are trying to change Secure Boot mode. Its followed by you having to enter 4 numbers to allow the change.

 

I don't know what Dont run bios means unless that's your own words.

 

Can you reboot and it will restart as normal or does it continue this message?

If it continues, can you enter the bios on a restart and change the settings to Default, then save and restart?

 

Turn off the tablet. If necessary, hold down the power button for several seconds.

 

To enter the bios, press the Volume Down (-) button and also the Power Button together for several seconds until the options menu opens.

Tap F10 for bios on the screen.

Tap F9 on the screen for Setup Defaults.

F10 to Save and Exit.

Was this reply helpful? Yes No
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation