Elite X2 1012 G2 Intel Sensors get disabled when AMT is OFF

[midi-sama]

So I tried to disable Remote Management Options in my Elite X2 G2 by disabling Active Management (AMT) box. Uppon reboot, a lot of sensors get disabled with it for some reason: Hall sensors, Gyro-Accelerometer sensors (All the sensors under Intel Sensor Hub) and ambiant light sensor too.

Why would they get disabled when AMT get disabled?
They are two different entities, one is for remote management, the other is tablet sensors, why is one affecting the other?

This issue is is present on 1.18 bios version (latest) and I guess even on 1.06 (or 1.16, it was the original firmware shipped with my device).

I would like an HP Engineer (that's knows why this happens) to clarify this issue, and if possible a later fix on the firmware.

Thank you. 

[Stryvix]

I am having the same isue with the latest n85 bios for this computer. It's a mess that when you dissable AMT you lose all sensors in this computer. No sense..

[Arthur-c]

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!

Thank you