Firmware for, HP PRIME GRAPHING CALCULATOR.

[HP-MACH]

Hi!, all:

From the attachment file, in clip.

[dougjgray]

Is this newer then what came on my Prime,  should I upgrade

[Tim_Wessman]

No, and no.

[HP-MACH]

Hi!, dougjgray:

Welcome, to Forum!.

Check in your HP PRIME GRAPHING CALCULATOR, what is this your version. Maybe, is the ultimate. Firmware only update if HP have next version.

For the emulator, the ultimate version is ...

 

[dougjgray]

Thanks Looks like I have the latest

[qinshan]

Hi, Mach,

My HP Prime shows the version is V0.025.5106, the version you shared is SDK0.30, which is the last one? or they are the same?

[HP-MACH]

Hi!, qinshan:

You have un your HP PRIME, the ultimate version. With the firmware, you can update only, with next version.

[qinshan]

Thanks a lot,

but unfortunately I have dowloaded SDK0.30 to my HP Prime, and can not recover to the original.

I should make a backup by using 'Creat mNand Image'.

[HP-MACH]

Hi!, qinshan:

Please, check this instructions, step by step in the SDK0.30 ...

HP Prime Manual Firmware Update:

1) Download firmware files and unzip to a folder.

2) Wipe calculator (optional)  a Hold down F,C and O buttons while resetting calculator  b At menu, press 4,3 and then Enter  c When format is complete, proceed to step 3.

3) Reset calculator (button on back) while holding the "Symb" button (will display either ARM update tool or recovery mode screen).

4) Connect the calculator using USB cable (wait for USB, to recognize device).

5) Run usbtool.exe

6) Select "Auto update" check box.

7) Click "Update" button (blue bars will show as the unit is updated).

😎 Reset calculator.

Note: if any step fails, please start, from step 3.

[HP-MACH]

Hi!, qinshan:

In the next site, all information what, you needed ... http://www.educalc.net/2336439.page