cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
ttaurus99
New member
1 0 0 0
Message 1 of 2
203
Flag Post

trying to connect my hp amp 100 Printer wirelessly and just couldn’t connect

HP Recommended
Hp amp 100
Microsoft Windows 10 (32-bit)

Wireless printer 

0 Kudos
1 REPLY 1
TEJ1602
HP Support Agent
HP Support Agent
18,719 18,696 1,536 1,511
Message 2 of 2
Flag Post
HP Recommended

@ttaurus99, Welcome to HP Support Community!

 

Connect an HP printer to a local Wi-Fi network to wirelessly print from a personal computer, smartphone, or tablet.

Wireless printer setup confirmation

Step 1: Connect the printer to the Wi-Fi network

Before you can wirelessly print, connect the printer to the same local wireless network your computer or mobile device is on. These steps also apply if you changed your internet service provider or installed a new router and need to reconnect the printer.

 

Printers without a touchscreen control panel:

  1. On the printer, press and hold the Wireless button  for five seconds or until the light starts blinking. For Tango printers, press the Wireless button and the Power button on the rear of the printer until the blue bar flashes.

  2. Within two minutes, press and hold the Wi-Fi Protected Setup (WPS) button on the router until the connection process begins. The light on the printer stops flashing when the connection completes.

    If your router does not have a WPS button, continue with these steps.

  3. Download and install the HP Smart app from 123.hp.com (Android, iOS), HP Smart - Microsoft Store (in English), or from HP Smart - Mac App Store (in English).

  4. Prepare the printer for a wireless network connection.

    For most HP printers without a touchscreen: Press and hold the Wireless and Cancel buttons until the Wireless and Power lights blink.

    For HP Laser printers without a touchscreen: Press and hold the Wireless button until the Attention light blinks. The printer might restart.

    For HP Tango printers: Press and hold the Wireless button on the back of the printer for five seconds until the front light flashes blue.

  5. Within two hours, follow the guided steps in the HP Smart app to add the printer and set up the wireless connection.

Also, refer to the document Connect to a Wireless HP Printer to learn about alternate connection methods.

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation