How to install the android update v4.4 for HP Slatebook 10 x2 PC?

[Shaan_forever]

Hello!

I've used the link provided by @The_Fossette for installing the udate of android v4.4 for my device i.e, HP Slatebook 10 x2, but i'm unable to run the setup on my device.

I'll be highly grateful if anyone who knows or have done this procedure before, can guide me through the installation procedure for this setup.

Thanks a lot!

-A consumer 

[Riddle_Decipher]

@Shaan_forever I'm not sure which link you are referring to? however, here's a link I found that should help you with upgrading the android OS using the recovery image on your device:

HP provides OTA (over-the-air) updates for the Android operating system on your tablet. When your tablet is connected to the Internet, updates download automatically and prompt you to install. If you received and installed the updated Android 4.4/KitKat operating system over the air, you do not need to use this document to update your tablet. To check for OTA updates and see which version of Android is currently installed on your tablet, refer to the HP support document Installing OTA (Over-the-Air) Android Operating System Updates on Your HP Slate

An operating system update does not destroy the data or settings you have saved on the tablet.

If needed, use a microSD card to manually install an updated version of Android on your tablet, using the steps in this document. If you choose to update manually, Slate tablets require a two-part update: The tablet must be updated to Android 4.3/Jelly Bean before updating to Android 4.4/KitKat.

This document describes how to manually update the operating system on your tablet using a microSD card.

  caution:

You must update the tablet from Android 4.2/Jelly Bean to Android 4.3/Jelly Bean before you can update to Android 4.4/KitKat. Follow the instructions in this document in the exact order they appear.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE (Applicable for both Slate 7 and Slatebook 10)

(Though the header is different or the link is for another device, the steps to follow will help resolve your concern & By the end of this article all the issues should be resolved)

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!