• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
HP Recommended

Hi Team,

 

I have 4 BL860c servers installed in a c7000 enclosure. servers in bay 1&2 are unable to ping/telnet/ssh. but the servers in bay 3&4 are able to ping/telent from the network. 2 flax10 modules are installed in back of the enclosure. flax 10 module are connected with other cisco switch through FC and some other machine are also connected with this switch.  the All servers are able to ping/telnet each other with in enclosure and local network. servers in bay1&2 are unaccessable from other network as there servers in bay 3&4 are accessable from other networks.

 

-OS HPUX 11.31

-IPFILTER Disabled

-Bastille is disabled

-Proper virtual domain is configured in flax10 module

-proper server profiles are configured in Flax10

-All blades are in sam VLAN

-proper gateway added in all machine

 

issue was starts when I restarted all the machines. Plz help to resolve this issue.

 

2 REPLIES 2
HP Recommended

Whoa! Information Overload! I'd make sure again everything is properly connected.

HP Recommended

Yep.... All things are connected properly................

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.