• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.

‎11-27-2018 11:05 AM

HP Recommended
Product: HP Compaq Pro 6300 SFF PC
Operating System: Microsoft Windows 10 (64-bit)

Greetings Friends, 

I'm slowly upgrading a refurbished HP Compaq Pro 6300 SFF PC

which came with Windows 10 x64.  I have had a lot of success installing the

Highpoint RocketRAID 2720SGL add-in controller in other PC motherboards.

That AIC comes with a low-profile bracket, which should allow it to be installed

in the x16 PCIe 2.0 slot in the HP Pro 6300.  Do you know anyone else who

has tried this add-in card in the same HP PC?  The one major issue is the

factory default setting of INT13 ENABLED, which makes it bootable.

I'd like to configure a RAID-0 array with 4 x SSDs, and then

to "Migrate OS" to that RAID array with Partition Wizard.

I've already migrated the OS to a JBOD SSD wired

to the motherboard's 6G SATA-III port, and that worked AOK.

Thanks for any and all help!  /s/ Paul

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.