ps/2 keyboard and mouse.

[melbin1]

i have found in device manager that

the ps/2 keyboard and ps/2 mouse is showing in yellow hazad symbol.

i have that two ports in machine , but didnt connected anything.

when i deploy them in machines the daily it shows an aler message because there is no device.

i tried to uninstal/disable. but very next reboot it will apear again.

i have tried the bios settings. but i didnt find any option to disable the ps/2 keyboard or mouse.

please help me.

BIOSConfig 1.0
;
; Originally created by BIOS Configuration Utility
; Version: 4.0.15.1
; Date="2019/02/20" Time="18:10:11" UTC="1"
;
; Found 191 settings (advanced)
;
Product Name
HP Z240 Tower Workstation
Processor 1 Type
Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz
Processor 1 Speed
3400 MHz
Universally Unique Identifier (UUID)
AC40D7D0CE03E9119C43BC0000300000
Memory Size
16384 MB DDR4 @ 2133 MHz
System Board CT Number
PESRHAACYBH2FL
Product Family
103C_53335X G=D

System BIOS Version
N51 Ver. 01.72 07/19/2018
BIOS Build Version
0000
ME Firmware Version
11.8.55.3510
Primary Video BIOS Version
nVidia 86.07.51.00.09
Super I/O Firmware Version
4.13.27
System Board ID
802F
Integrated MAC Address 1
10-E7-C6-48-B5-4A
Asset Tracking Number
CZC8517SQB
Ownership Tag


BIOS Rollback Policy
*Unrestricted Rollback to older BIOS
Restricted Rollback to older BIOS
Minimum BIOS Version
00.00
Manufacturing Programming Mode
Unlock
*Lock
Password Minimum Length
8
At least one symbol is required in Administrator and User passwords
*No
Yes
At least one number is required in Administrator and User passwords
*No
Yes
At least one upper case character is required in Administrator and User passwords
*No
Yes
At least one lower case character is required in Administrator and User passwords
*No
Yes
Are spaces allowed in Administrator and User passwords?
*No
Yes
Clear password jumper
Ignore
*Honor
Prompt for Admin password on F9 (Boot Menu)
*Disable
Enable
Prompt for Admin password on F11 (System Recovery)
*Disable
Enable
Prompt for Admin password on F12 (Network Boot)
*Disable
Enable
Wake on LAN Power-on Password Policy
*Bypass Password
Require Password
TPM Specification Version
1.2
TPM Device
Hidden
*Available
TPM State
Disable
*Enable
Clear TPM
*No
On next boot
TPM Activation Policy
F1 to Boot
Allow user to reject
*No prompts
Verify Boot Block on every boot
*Disable
Enable
BIOS Data Recovery Policy
*Automatic
Manual
Prompt on Network Controller Configuration Change
*Disable
Enable
Lock BIOS Version
*Disable
Enable
Dynamic Runtime Scanning of Boot Block
Disable
*Enable
Physical Presence Interface
Disable
*Enable
Drivelock Password on restart
Disable
*Enable
Save/Restore MBR of System Hard Drive
*Disabled
Enabled
Secure Erase Hard Disk Serial Number

Secure Erase Hard Disk Model Number

Secure Erase Completion Date

Secure Erase Completion Status

Permanent Disable Absolute Persistence Module Set Once
*No
Yes
Absolute Persistence Module Current State
*Inactive
Active
System Management Command
*Disable
Enable
SureStart Production Mode
Disable
*Enable
Select Language
English
*Deutsch
Espanol
Italiano
Francais
Japanese
Portugues
Dansk
Svenska
Nederlands
Norsk
Suomi
Simplified Chinese
Traditional Chinese
Select Keyboard Layout
English
*Deutsch
Espanol
Italiano
Francais
Japanese
Portugues
Dansk
Svenska
Nederlands
Norsk
Suomi
Simplified Chinese
Traditional Chinese
Sunday
*Disable
Enable
Monday
*Disable
Enable
Tuesday
*Disable
Enable
Wednesday
*Disable
Enable
Thursday
*Disable
Enable
Friday
*Disable
Enable
Saturday
*Disable
Enable
BIOS Power-On Hour
0
BIOS Power-On Minute
0
Startup Menu Delay (sec.)
*0
5
10
15
20
25
30
35
40
45
50
55
60
Fast Boot
Disable
*Enable
Audio Alerts During Boot
Disable
*Enable
After Power Loss
*Power Off
Power On
Previous State
NumLock on at boot
Disable
*Enable
CD-ROM Boot
*Disable
Enable
Prompt on Memory Size Change
Disabled
*Enabled
USB Storage Boot
*Disable
Enable
Network (PXE) Boot
Disable
*Enable
Prompt on Fixed Storage Change
Disabled
*Enabled
Legacy Boot Options
*Disable
Enable
Legacy Boot Order
<no legacy boot options available>
UEFI Boot Options
Disable
*Enable
UEFI Boot Order
HDD:SATA:1
NETWORK IPV4:EMBEDDED:1
NETWORK IPV6:EMBEDDED:1(Disabled)
HDD:USB:1
CDROM:SATA:1
Configure Legacy Support and Secure Boot
Legacy Support Enable and Secure Boot Disable
*Legacy Support Disable and Secure Boot Enable
Legacy Support Disable and Secure Boot Disable
Import Custom Secure Boot keys
*Do Nothing
On next boot
Clear Secure Boot keys
*Disable
Enable
Reset Secure Boot keys to factory defaults
*Disable
Enable
Enable MS UEFI CA key
No
*Yes
Ready to disable MS UEFI CA Key
Not Ready
*Ready
Custom Keys Image Verification State
*No Custom Keys
Fail
Success
Configure Storage Controller for RAID
Disable
*Enable
NVMe Write Endurance Masking
*Disable
Enable
Early PCIe Delay
*Disable
Enable
Accelerate USB Enumeration
*Disable
Enable
RST Remapping
*Disable
Enable
Audio Device
Disable
*Enable
Embedded LAN controller
Disable
*Enable
Wake On LAN
Disabled
Boot to Network
*Boot to Hard Drive
Boot to Normal Boot Order
Internal Speakers
Disable
*Enable
Runtime Power Management
Disable
*Enable
Extended Idle Power States
Disable
*Enable
S4/S5 Maximum Power Savings
*Disable
Enable
SATA Power Management
Disable
*Enable
Dust Filter
*Disable
Enable
Dust Filter Reminder (Days)
15
30
*60
90
120
180
Integrated Video
*Disable
Enable
SATA0
Device hidden
*Device available
SATA1
Device hidden
*Device available
SATA2
Device hidden
*Device available
SATA3
Device hidden
*Device available
M.2
Device hidden
*Device available
eSATA Port
*Disable
Enable
Front USB Ports
Disable
*Enable
Rear USB Ports
Disable
*Enable
Restrict USB Devices
*Allow all USB Devices
Allow only keyboard and mouse
Allow all but storage devices and hubs
USB Charging Ports
Disable
*Enable
Power Button Override
Disable
*4 sec
15 sec
Front USB Port 1
Disable
*Enable
Front USB Port 2
Disable
*Enable
Front USB Port 3
Disable
*Enable
Front USB Port 4
Disable
*Enable
Rear USB Port 1
Disable
*Enable
Rear USB Port 2
Disable
*Enable
Rear USB Port 3
Disable
*Enable
Rear USB Port 4
Disable
*Enable
Rear USB Port 5
Disable
*Enable
Rear USB Port 6
Disable
*Enable
Accessory USB Port 1
Disable
*Enable
Accessory USB Port 2
Disable
*Enable
Configure Option ROM Launch Policy
All Legacy
*All UEFI
All UEFI Except Video
Intel Software Guard Extensions (SGX)
Disable
Enable
*Software Controlled
Turbo-boost
Disable
*Enable
Hyperthreading
Disable
*Enable
Multi-processor
Disable
*Enable
POST Prompt for RAID Configuration
Disable
*Enable
Virtualization Technology (VTx)
Disable
*Enable
Virtualization Technology for Directed I/O (VTd)
Disable
*Enable
Trusted Execution Technology (TXT)
*Disable
Enable
Increase Idle Fan Speed(%)
0
Unique Sleep State Blink Rates
*Disable
Enable
Active Management (AMT)
*Disable
Enable
USB Key Provisioning Support
*Disable
Enable
Unconfigure AMT on next boot
*Do Not Apply
Apply
SOL Terminal Emulation Mode
*ANSI
VT100
Verbose Boot Messages
*Disable
Enable
Watchdog Timer
*Disable
Enable
OS Watchdog Timer (min.)
*5
10
15
20
25
BIOS Watchdog Timer (min.)
*5
10
15
20
25
USB Redirection Support
Disable
*Enable
Show Unconfigure ME Confirmation Prompt
Disable
*Enable
CIRA Timeout (min.)
*1 min
2 mins
3 mins
4 mins
Never
Slot 1 Option ROM Download
Disable
*Enable
Slot 2 Option ROM Download
Disable
*Enable
Slot 3 Option ROM Download
Disable
*Enable
Slot 4 Option ROM Download
Disable
*Enable
Slot 1 Speed
*Gen3
Gen1
Gen2
Slot 2 Speed
*Gen3
Gen1
Gen2
Slot 3 Speed
*Gen3
Gen1
Gen2
Slot 4 Speed
*Gen3
Gen1
Gen2
PCI Express x1 Slot 1
Disable
*Enable
PCI Express x16 Slot 2
Disable
*Enable
PCI Express x4 Slot 3
Disable
*Enable
PCI Express x4 Slot 4
Disable
*Enable
Allow PCIe/PCI SERR# Interrupt
Disable
*Enable
BIOS Source
*HP
Custom
Automatically Check for Updates
Daily
Weekly
*Monthly
Automatic BIOS Update Setting
*Disable
Let user decide whether to install updates
Install all updates automatically
Install only important updates automatically
Update Address

Check for Update on Next Reboot
*Disable
Enable
Update BIOS via Network
Disable
*Enable
Use Proxy
*Disable
Enable
Proxy Address

DNS Configuration
*Automatic
Manual
DNS Addresses

Data transfer timeout
30
IPv4 Address

IPv4 Configuration
*Automatic
Manual
IPv4 Gateway

IPv4 Subnet Mask

Connected BIOS
Disable
*Enable
Force HTTP no-cache
*Disable
Enable
Save Custom Defaults
*Do not Save
Save
Apply Custom Defaults and Exit
*No
Yes
Apply Factory Defaults and Exit
*No
Yes
Restore Security Settings to Factory Defaults
*Disable
Enable